Rj45 Ports; Power Connections; Poe Output; Poe Budget - Parallax PDT-NSU-7105-MP-SF-I Operation Manual

6.3 RJ45 Ports

The Front Panel has 5xRJ45 Ports, 4 of which are 10/100/1000 BASE-T PoE+ Ports, and 1 x
10/100/1000 BASE-T RJ45 Uplink Port– note that only TP1-TP4 are PoE+ capable ports, in
accordance with the IEEE 802.3at Standard.
The remaining SFP port is 1000 BASE-FX and accept a wide range of SFP modules, using 1 or 2 core
fiber, in Single or Multi-Mode fiber configuration.

6.4 Power Connections

Model
PDT-NSU-71045-MP-SF-I
Note: All Power Supplies should provide over-current and short-circuit protection and should
have a capacity rating to meet the required output current for the device.

6.5 PoE Output

PDT-NSU-7105-MP-SF-I

6.6 PoE Budget

The total PoE Power Budget is shown in the following table:
V-
GND
Model
Supply Voltage
Total PoE Budget
V+ Power Input
12-48VDC
802.3af 802.3at 802.3bt
● ●
+12-48VDC
100W