6. Connectors and Indicators
6.1 LED Indicators
The Front Panel LEDs display the status of the switch and the associated port connections as
indicated in the table below:
LED
Name
PWR
Power
L/A
Link Activity
SPD
Link Speed
6.2 RJ45 Ports
The Front Panel has 5 RJ45 Ports and the Uplink Port is to be used to connect to the host network or
device and is not PoE compatible. The remaining 4 ports should be used as the access ports.
Front Panel
Colour
Green
Yellow
ON – Steady
ON – Flashing
Green
ON – Steady
State
Status
OFF
Unit Power Off
ON
Unit Power On
OFF
No Connection
Connection
Data Tx/Rx
OFF
No Link
100 Mbps