Table of Contents
Advertisement
Hold the saw with both hands firmly with the thumbs and fingers encircling the handles of
the saw and place your body and arms to allow you to withstand the rebound forces. The
rebound forces can be controlled by the operator, if appropriate precautions are taken. Do
not allow chain saw to start.
Do not stretch the arm too far and do not cut above the shoulder height. This helps
prevent unintentional end contacts and allows better control of the chain saw in
unforeseen situations.
Use only the manufacturers specified replacement guides and chains. Incorrect
replacement guides and chains may cause chain breakage and / or rebound.
Follow manufacturer's instructions for sharpening and servicing the chain saw. A
decrease in the depth gauge level can lead to an increase in rebounds.
Residual risks
Even if you use this product in compliance with all safety requirements, the potential risks of
injury and damage remain. The following hazards may arise in the structure and design of this
product:
Always be vigilant when using this product, so you can recognize and manage the risks
rather.
Rapid intervention can prevent serious injury and property damage.
Turn off and unplug the tool if there are any malfunctions. Have it checked by a qualified
professional and have repairs carried out, if necessary, before using it again.
There are harmful health consequences resulting from the emission of vibrations if the
product is used for long periods of time or not properly managed and properly maintained.
There is risk of injury and property damage due to attachments or broken the sudden
impact of hidden objects when using cutting.
Risk of injury to persons and property caused by flying objects.
Prolonged use of this product exposes the operator to vibration and can produce so-
called "white finger" disease. To reduce the risk, wear gloves and keep your hands warm.
If any of the symptoms of "white finger syndrome" occur, seek immediate medical
attention. Symptoms of the "white finger" include numbness, loss of sensitivity, tingling,
tingling, and pain, loss of strength, color changes or skin condition. These symptoms
usually appear on the fingers, hands or wrists. Risk increases at low temperatures.
Symbols
Symbol warning of a warning
Read and refer to these operating instructions
Wear safety equipment that includes a helmet, protective helmet and protective
goggles
Guarantee sound power level
This tool must be used by persons trained to cut down trees; Read this
instruction manual!
The contact of the end of the bar with any object must be avoided.
6
Advertisement
Table of Contents
