DFI-ITOX G7L630-B User Manual page 89

PWR Lost Resume State
Keep Off
Turn On
Last State When power returns after an AC power failure, the
Wake-Up By PCI Card
Enabled
Disabled The system will not wake up despite access to the PCI
card.
Power On By Ring
Set this field to Enabled to use the modem ring-on function. This will
allow your system to power-on to respond to calls coming from an
external modem.
USB KB Wake-Up From S3
This field, when enabled, allows you to use a USB keyboard to wake
up a system that is in the S3 (STR - Suspend To RAM) state. This
can be configured only if the "ACPI Suspend Type" field is set to
"S3(STR)".
When power returns after an AC power failure, the
system's power is off. You must press the Power
button to power-on the system.
When power returns after an AC power failure, the
system will automatically power-on.
system will return to the state where you left off
before power failure occurs. If the system's power is
off when AC power failure occurs, it will remain off
when power returns. If the system's power is on
when AC power failure occurs, the system will power-
on when power returns.
This field should be set to Enabled only if your PCI
card such as LAN card or modem card uses the PCI
PME (Power Management Event) signal to remotely
wake up the system.
card will cause the system to wake up.
card's documentation for more information.
Access to the LAN card or PCI
3
BIOS Setup
Refer to the
8 9