Table of Contents
Advertisement
2
Hardware Installation
USB Ports
USB 4
USB 3
USB 2
USB 1
1 0
2
1
9
USB 5-6
USB 7-8
The system board supports 8 USB 2.0/1.1 ports. USB allows data
exchange between your computer and a wide range of
simultaneously accessible external Plug and Play peripherals.
Four onboard USB 2.0/1.1 ports (Black) are at locations CN5 (USB
1-2) and CN6 (USB 3-4) of the system board.
J17 (USB 5-6) and J18 (USB 7-8) allow you to connect 4 additional
USB 2.0/1.1 ports. The USB ports may be mounted on a card-edge
bracket. Install the card-edge bracket to the system chassis then
insert the connector that is attached to the USB port cables to J17
or J18.
BIOS Setting
Configure the onboard USB in the Integrated Peripherals submenu
("Onboard Device" section) of the BIOS. Refer to chapter 3 for
more information.
40
Advertisement
Table of Contents
