DFI-ITOX G7L630-B User Manual page 24

2
Hardware Installation
4. The CPU socket comes with a cover that is attached with a
removable protective cap. The cap is used to protect the CPU
socket against dust and harmful particles. Remove the protective
cap only when you are about to install the CPU.
5. Lift the protective cap from the location pointed below to detach
the cap from the cover.
6. Unlock the socket by pushing the lever down, moving it away from
the side tab of the socket, then lifting it up.
24
Important:
The CPU socket must not come in contact with anything
other than the CPU. Avoid unnecessary exposure. Remove
the protective cap only when you are about to install the
CPU.
Cover
Tab
Protective cap
Lever
Lift this part up
Lever lifted