Table of Contents
Advertisement
Power-on Select
J15 is used to select the method of powering on the system. If you
want the system to power-on whenever AC power comes in, set
J15 to Short. If you want to use the power button, set J15 to Open.
Important:
If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set J15 to Short.
2. The PWR Lost Resume State field must be set to "Turn
On". (Power Management Setup of the BIOS).
Hardware Installation
1
2
Short:
J15
Power-on via
AC power
2
1
2
Open:
Power-on via
power button
(default)
33
Advertisement
Table of Contents
