Table of Contents
Advertisement
SOYO™
1. 3.3V AGP cards (essentially this means all AGP 1X and AGP 2X
cards) are not supported. Only 1.5V AGP cards essentially this means
any card that supports AGP 4X or higher) can be used in this
mainboard.
2. Please read the user guide before proceeding with your installation.
Serious damage may occur if the procedure is not followed properly.
3. If you have any problem getting your system to work, please follow
the trouble shooting tips on page 26 of your user guide.
4. For immediate Technical questions, please visit
www.soyousa.com/support, www.soyousa.com/kb.
5. Make sure you use a power supply for P4 motherboard (an ATX 12V
power supply), preferably of 350W or higher.
Advertisement
Table of Contents
