SOYO SY-P4I845GE Quick Start Manual page 10

SY-P4I845GE/GV Quick Start Guide
Configure Memory
Step 2.
P4I845GE model support PC2100 & PC2700, non-ECC and non-registered module.
P4I845GV model only support PC2100 module, non-ECC and non-registered module.
The largest memory capacity possible is 2GB. On this motherboard (GE/GV), DRAM
speed can be set independent from the CPU front side bus speed. A maximum of 2 pcs.
Double-sided module can be used at the same time.
Memory Configuration Table
Number of Memory Modules
RAM Type
Memory Module Size (MB)
Note: System must have a 533MHz FSB CPU to have PC2700 memory support. (for P4I845GE
model)
Connect cables, case wires, and power supply Install
Step 3.
expansion cards
This section tells how to connect internal peripherals and the power supply to the
Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive,
Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED,
and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new
SY-P4I845GE/GV Motherboard, please refer to SY-P4I845GE/GV Motherboard User's
Manual and Technical Reference online manual on the CD-ROM.
DDR1
DDR RAM
128 / 256 / 512 / 1024 MB
10
DDR2