SOYO SY-P4I845GE Quick Start Manual page 13

Install expansion cards
Step 4.
The motherboard has 1 AGP slot (for P4I845GE model) and 5 PCI slots.
1. Read the instruction document of the related expansion card before inserting the
expansion card into the computer.
2. Press the expansion card firmly into the expansion slot on the motherboard.
3. Be sure the metal contacts on the card are seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install related driver for the operating system you use.
Note1: Only AGP card with 1.5 volts can be used in this M/B (any card
supporting AGP 4X or higher). Using 3.3 volts AGP card (AGP 1X or 2X cards)
will damage your motherboard. For AGP card voltage specification, please check
the AGP card manual or contact your AGP card manufacturer. (for P4I845GE
model)
Note2: When you use an AGP add-in card on the P4I845GE mainboard the
onboard VGA will automatically be disabled. It's not possible to use onboard
VGA and an AGP add-in card at the same time. For both versions (P4I845GE and
GV) note that when using a PCI VGA card, make sure that the init display setting
is set to PCI slot instead of onboard/AGP. Also, note that when using a PCI VGA
card the on chip VGA setup option can be used to disable onboard VGA.
SY-P4I845GE/GV Quick Start Guide
13