SOYO SY-P4I845GE Quick Start Manual page 14

SY-P4I845GE/GV Quick Start Guide
CMOS Clear (JP5)
In some cases the CMOS memory may contain wrong data, follow the steps below to
clear the CMOS memory.
1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This
jumper can be easily identified by its white colored cap.
2. Then put the jumper back to 1-2 to allow writing of new data into the CMOS memory.
CMOS Clearing
Short pin 2-3 for
JP5 Setting at least 5 seconds to
clear the CMOS
Note: You must unplug the ATX power cable from the ATX power connector
when performing the CMOS Clear operation.
Clear CMOS Data
1 2 3
14
Retain CMOS Data
Short pin 1-2 to
retain new
settings
1 2 3