Honda F220K1 Owner's Manual page 41

Clutch cable adjustment
1. Remove the two screw bolts from
front cover, and remove the front
cover.
2. Set the handlebar height in the
center position (see page 24).
3. Push and hold the lock lever. Measure the spring lengths when the clutch
lever is operated to the DISENGAGED and ENGAGED positions.
4. With the clutch lever ENGAGED, adjust so that the extension value of the
clutch spring is as measured below.
Extension value:
A (ENGAGED) - a (DISENGAGED) = 2±0.5 mm (0.08±0.02 in)
PUSH
LOCK LEVER
5. Loosen the lock nut and turn the
adjusting nut to obtain the
correct extension value of the
clutch spring. After adjustment,
tighten the lock nut securely.
6. Reinstall the front cover.
38
Squeeze
(ENGAGED)
Release
(DISENGAGED)
SCREW BOLTS
FRONT COVER
CLUTCH SPRING
<Main clutch lever DISENGAGED>
a
<Main clutch lever ENGAGED>
A
INCREASE
EXTENSION
VALUE
ADJUSTING NUT
LOCK NUT
DECREASE
EXTENSION
VALUE