Part Name
Sensors
(Thermostat,
Thermistor,
Radiant/Flame)
Heater
Reassembly procedures are in the reverse order of dissasembly procedures.
20 _ Disassembly and Reassembly
Figure
1. Remove each securing screws to remove each of
1. After separate Motor, Duct-Fan, do the following.
2. Remove 6 Housing Heater-Terminals.
3. Remove 2 screw from Heater Die.
4. Separate Heater in Drum-Back.
Description
the sensors.
For differences between Gas and Electric.