Samsung DV6000R Service Manual page 13

Part Name
Door Reversal
Figure
1. It is recommended to put a soft rug on the floor to
2. Unplug the power cord.
3. Remove two door hinge screws.
4. Lift the door and remove it.
5. Remove the two screws that are above and below
6. Remove the two screws above and below the lever
7. Remove the two screws that hold the lever holder
8. Re-insert the two screws that held the lever holder
Description
prevent scratches on the door.
There is a screw on the back side of the hinge
that will support the door as you unscrew the
hinge screws.
the cut-out in the frame front.
holder on the opposite side of the door opening.
in place, and then remove the lever holder.
into the same screw holes, and then tighten.
Disassembly and Reassembly _ 13