Checchi & Magli BABY COMPACT Use And Maintenance Manual page 56

Adjusting the planting unit load
The adjustment unit is usually mounted in position (A).
Setting the unit to position (A) decreases the weight on
the packing wheels.
A
C
Proceed as outlined below.
1) Turn the handwheel (C) clockwise or anticlockwise to increase or decrease the load of the planting unit on the
ground.
Adjusting the automatic safety release function
UN41-0056CF
English language
ADJUSTMENT INFORMATION
B
A
Setting the unit to position (B) increases the weight on
the packing wheels.
The automatic release is designed to protect the trans-
mission components from overloads (e.g. if the dispens-
er or ejector jams).
The device is already set by the manufacturer during the
testing stage, but can be adjusted by the user according
to requirements.
For adjustments, proceed as outlined below.
1) Turn the ring nut (A) clockwise to increase the release
resistance (i.e. less sensitive).
Turn the ring nut (A) anticlockwise to decrease the
release resistance (i.e. more sensitive).
18
5
Use and maintenance