Overview - Selector Mechanism - Audi A6 2011 Repair Manual

Audi A6 2011 ➤ , Audi A6 Avant 2011 ➤ , Audi A7 Sportback 2011 ➤ , Audi ...
7-Speed Dual Clutch Transmission 0CK - Edition 11.2015
1.3

Overview - Selector Mechanism

Selector Mechanism
WARNING
There is a risk of injury and accident from accidentally engag‐
ing a gear when the engine is running.
1 - O-Ring
❑ Replace after removing
2 - Selector Lever Cable
❑ Do not bend
❑ Removing and instal‐
ling. Refer to
⇒ "1.9 Selector Lever
Cable, Removing and
Installing", page 25
3 - Bolt
❑ For selector lever cable
adjustment
❑ Tightening specification
-item 6-
⇒ Item 6 (page 12)
4 - Transmission Park Selector
Switch - F305-
❑ Consists of two micro-
switches on the circuit
board on the Shift Lock
Solenoid - N110- .
❑ Can only be replaced to‐
gether with the Shift
Lock Solenoid - N110- .
Refer to
⇒ "1.11 Shift Lock Sol‐
enoid N110 , Removing
and Installing",
page 32 .
5 - Shift Lock Solenoid - N110-
❑ Removing and instal‐
ling. Refer to
⇒ "1.11 Shift Lock Sol‐
enoid N110 , Removing
and Installing",
page 32 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
6 - Cap
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
❑ Via the Shift Lock Solenoid - N110-
7 - Selector Lever Sensor System Control Module - J587- with Tiptronic Switch - F189-
❑ Removing and installing. Refer to
⇒ "1.12 Selector Lever Sensor System Control Module J587 , Removing and Installing", page 34
8 - Nut
❑ 8 Nm
❑ Quantity: 4
❑ For securing the shift mechanism to the body
14
Rep. Gr.34 - Controls, Housing
.
.
.