H3C WX Series Getting Started Manual page 15

To do...
Exit interface view
Create a WLAN service
template
Specify the service set
identifier (SSID)
Bind the WLAN-ESS
interface to the service
template
Enable the authentication
method
Enable the service template
Exit interface view
Configuring an AP
Specify the AP name and its
model number and enter AP
template view
Exit interface view
Enable WLAN radios
Use the command...
quit
wlan service-template
service-template-number
{ clear | crypto }
ssid ssid-name
bind wlan-ess interface-index
authentication-method
{ open-system | shared-key }
service-template enable
quit
wlan ap ap-name model
model-name
quit
wlan radio { disable | e0008vuTc 0.0f346.44 625.6{
5-5
Remarks
Required
Required
By default, no service template is created.
Required
By default, no SSID is set.
Optional
By default, no WLAN-ESS interface is bound
to the service template..
Required
By default, open system authentication is
enabled.
You can enable open system authentication,
shared key authentication, or both.
Required
By default, the service-template is disabled.
Required
Required
The model number needs to be specified only
during new AP template creation.
Required