Superabrasive LAVINA Operator's Quick Manual

Propane grinders

Table of Contents

Download this manual

Lavina machines have four anchoring points for strapping

during transportation. Make sure machine is securely

anchored, and grinding head cover is lowered down /

locked. Tighten the straps over non-moving parts, e.g.

machine chassis.

OPERATOR'S QUICK GUIDE

propane GRINDERS

Lavina machines have two lift points. When lifting machine,

make sure the weights are in backwards position, and the

grinding head cover is raised /locked in transport position.

The machine is equipped with two locking

mechanisms – one for tilt and one for handle

adjustment. Pull the lever towards operator

to unlock and adjust tilt / handle to desired

position. The mechanism locks itself back.

IMPORTANT!

If the locking mechanisms start making noise

or move roughly, lubrication is recommended.

Check your machine manual for lubricant type.

Table of Contents

Need help?

Do you have a question about the LAVINA and is the answer not in the manual?

Page 1 OPERATOR’S QUICK GUIDE propane GRINDERS Lavina machines have four anchoring points for strapping Lavina machines have two lift points. When lifting machine, during transportation. Make sure machine is securely make sure the weights are in backwards position, and the anchored, and grinding head cover is lowered down / grinding head cover is raised /locked in transport position.
Page 2 To move the weights, release the locking knob by pulling it, and then release it to lock into the new desired position. The locking knob has a rest position. Pull it to unlock and rotate to 90 degrees - in this position, the weights are free to move.
Page 3 If working dry, connect a vacuum. Grinder is equipped with a Camlock fitting: 2.5" E250 on 25" machines 3" E300 on 30" machines Grinder is equipped with a two-way water tap. 1. Choose water source - tank or hose. 2. Adjust water flow. Use the tool holder key /1 / to rotate the key lock / 3 / in order to unlock and remove security plate / 2/.
Page 4 1. ELECTRONIC MODULE 2. THROTTLE CONTROLLER 3. ENGAGE / DISENGAGE CLUTCH 4. USB PORT 5. LIGHTS SWITCH 6. EMERGENCY STOP BUTTON 7. sTART / STOP ENGINE SWITCH USE ONLY VAPOR PROPANE TANKS. DO NOT FILL TANK OVER 80%. Using a LPG tank (used on forklifts) will prevent engine from starting and working properly, and result in damaging the pressure regulator.