Table of Contents
Advertisement
Range"is displayed on
screen.
The monitor does not
enter into a low-power
sleep state.
Touch function is not
working (select
products only)
"OSD Lockout" is
displayed
"Power Button
Lockout" is displayed.
Monitor has trouble
waking from Sleep
mode
higher than what the monitor supports.
The monitor's power saving control is disabled. Open the OSD menu and
The touch screen function is enabled only if
the USB Type-B port on the monitor is
connected to the USB-Type-A port on the
computer via a USB Type-B-to-A cable.
The monitor's OSD lockout function is
enabled.
The monitor's Power Button Lockout feature
is enabled.
supported setting.
select Power, select Auto-
Sleep Mode, and then set
auto-sleep to On.
Connect the appropriate
cables.
Press and hold the Left button
for 10 seconds to disable the
OSD Lockout function.
Press and hold the Power
button for 10 seconds to
unlock the power button
function.
DisplayPort inputs: Set the
DisplayPort hot-plug
detection to Always Active.
Power mode monitors: Set
the hot-plug detection to
Always Active to switch the
monitor to Performance
mode.
23
Advertisement
Table of Contents
