Eaton IZM6-TEST-KIT Instruction Manual
  1. Manuals
  2. Brands
  3. Eaton Manuals
  4. Test Equipment
  5. IZM6-TEST-KIT
  6. Instruction manual
Eaton IZM6-TEST-KIT Instruction Manual

Eaton IZM6-TEST-KIT Instruction Manual

Handle test kit for trip unit(pxr4.1,pxr6.1)
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KT TESTER
Handle Test Kit for Trip
Unit(PXR4.1,PXR6.1)
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IZM6-TEST-KIT and is the answer not in the manual?

Questions and answers

Related Manuals for Eaton IZM6-TEST-KIT

Summary of Contents for Eaton IZM6-TEST-KIT

  • Page 1 KT TESTER Handle Test Kit for Trip Unit(PXR4.1,PXR6.1) Instruction Manual...

  • Page 2: Table Of Contents

    KT TESTER Table of Contents Section 1: Production profiles ..............2 Section 2: Production composition .............. 2 Operating parameters Section 3: ............3 3.1 Parameters of Adapter ................3 3.2 Parameters of Tester ................... 3 Section 4: Operating instructions ............. 3 4.1 Panel layout ....................

  • Page 3: Section 1: Production Profiles

    KT TESTER Product profiles Section 1:  KT TESTER tester is applied to the current type protection test of the trip unit;  KT TESTER can be used for the characteristic test of the trip unit and the circuit breaker; ...

  • Page 4: Operating Parameters

    KT TESTER Section 3: Operating parameters 3.1 Parameters of Adapter Input voltage: AC100V~240V Frequency: 50/60Hz Output voltage: DC25.2V Working temperature: -5~40℃ Storage temperature: -20~50℃ 3.2 Parameters of Tester Size of KT TESTER: L：205mm,W：137mm,H：70mm When using the tester, the parameter values in Table 1 must be within the normal operating range。...

  • Page 5: Panel Layout

    KT TESTER 4.1 Panel layout 1. Test cable connection port(DB25) ； 2. Charging adapter input interface ； 3. Power switch ； 4. LCD ； 5. “WORK”light:it is on if the tester works normally ； 6. “TEST”light:it flickers during the test ； 7.

  • Page 6: Test Connection With The Circuit Breaker

    KT TESTER Connect the socket boss upward Figure3 test terminal Figure5 “4，5” cables Figure4 Test port 4.2.2 Test connection with the circuit breaker When testing the circuit breaker, connect the test terminal of KT TESTER to the programming test port of the trip unit, and pay attention to the direction of the test terminal. Connect the "4 and 5"...
  • Page 7 KT TESTER Press the "SET" key to enter the main test menu. Other keys are invalid. This symbol represe nts the current selectio Press the "ENTER" key to enter the parameter setting and test interface, and the steps are as shown in 4-7.
  • Page 8 KT TESTER 3 、 SET TEST CURRENT ： 1) Move to this column through " ↑ " and " ↓ "; 2) Press the "ENTER" key to enter the parameter setting state. At this time, the "=" on the left side of the column will change to "...
  • Page 9 KT TESTER 400~2000A 1000A:0.1V IZM6 2500~4000A 1000A:0.067V IZM6 4000~6300A 1000A:0.05V Table 3 Input current value for test Display Protection Input current value Action result accuracy Long time 1.5 x Ir (Current setting of Long Trip after delaying ±5% Test time) the setting time(tr) Trip after delaying Short time...

  • Page 10: Precautions For Use

    KT TESTER Section 5: Precautions for use  After the tests, please turn off the power supply of the tester in order to avoid battery power loss.  There are lithium batteries inside. Please use them under specified conditions to avoid safety problems such as overheating, explosion, fire, etc;...

Table of Contents