Advertisement
Problem/
Indication on the display
error
unit and problem
description
F01
Water inflow fault
F03
Drainage fault
F04/F05/F06/
Electronic module fault
F07/F23
F24
Water level reaches
overflow level
F13
Error while locking the
door
F14
Error while locking the
door
Unb
Unb Unbalance alarm
What to do?
Check the following:
• Is the water supply tap open and is the
pressure too low?
• Is the water supply hose pinched?
• Is the filter on the water supply hose clogged
• Is the hose frozen?
Check the following:
• Is the hose pinched, does the water flo
through it?
• Is the filter on the drain hose clogged
• Is the hose frozen?
Switch off the appliance;
.
Press the
error reoccurs, call a service technician.
Stop the programme by pressing the
button. Restart the programme.
If the appliance continues to pump water into
the tub, close the water tap and call a service
technician
Door is closed, but it cannot be locked.
Switch off the washing machine. Switch it back
on and restart the washing programme.
If the error reoccurs, call a service technician.
Door is closed, but it cannot be unlocked.
Turn off the appliance, then turn it back on. If
the error reoccurs, call a service technician.
Unbalance alarm shall be solved by the following
methods
1.Laundry winding
clothes and put them back into the washing
machine, then select the single dewatering
program to dry again.
2.
Too light-weighted laundry
button again. If the
shutdown
, open the door, shake the
47
Advertisement
