Installation - Bowers & Wilkins CDA-2HD Manual

2. Installation

2.1 Rack mounting
CDA-2HD is intended to be installed in a standard
19-inch equipment rack. It is supplied with rack
mount ears, but not rack mount bolts and nuts.
Ensure that, once mounted in the rack, the amplifier
is well ventilated and that the ventilation apertures
are not obstructed. If the system is taken out of use
for a long period, disconnect the amplifier from the
mains power supply.
The CDA-2HD is supplied with two rack mounting
ears for installation in standard equipment racks.
Attach the brackets by inserting machine screws
through each bracket into the threaded holes in the
side of the amplifier, see Diagram 2.
To rack mount two CDA-2HD, please use the link
bracket provided and use the shorter side of the ear
mount for installation. See Diagram 3.
Diagram 3. Two CDA-2HD rack mounting
4x
180º
g
h i
Diagram 2. Single CDA-2HD rack mounting
2x
4x
e
d f
c d
b
g
h i
a c
b
e
d f
2x
4x
a
b
a c
b
d e
f
4