Table of Contents
Advertisement
2. Installation
Diagram 2. Rack mounting
2.1 Rack mounting
CDA-4D is intended to be installed in a standard
19-inch equipment rack. It is supplied with rack
mount ears, but not rack mount bolts and nuts.
a
c
b
Ensure that, once mounted in the rack, the amplifier
is well ventilated and that the ventilation apertures
4x
are not obstructed. If the system is taken out of
use for a long period, disconnect the amplifier
a
b
from the mains power supply.
The CDA-4D is supplied with two rack mounting
ears for installation in standard equipment racks.
Attach the brackets by inserting machine screws
through each bracket into the threaded holes in
the side of the amplifier, see Diagram 2.
a
a
c
b
b
≥ 50mm (2in)
≥ 50mm (2in)
warm air
cool air
4
Advertisement
Table of Contents
