System Block Diagram; Getting Started; Prerequisites; Starting The Board For The First Time - 96Boards WinLink E850 Hardware User Manual

System Block Diagram

Getting Started

Prerequisites

Before you power up your WinLink E850 Development Board for the first time you will need the following:
WinLink E850 Development Board

A 96Boards compliant power supply (included in box ).

A LCD Monitor that supports a HDMI/DVI interface with resolution of 1080P/60Hz.

HDMI-HDMI cable or HDMI-DVI cable to connect the board to the Monitor.

A computer keyboard with USB interface. A computer mouse with USB interface.


Starting the board for the first time

To start the board, follow these simple steps:
Step.1) Connect the HDMI cable to the WinLink E850 Development Board HDMI connector and to the LCD Monitor.
Step.2) Set the the second & third pin of switch SW1 to the position ON and connect the keyboard to USB connector marked
P2 and the mouse to the USB connector marked P3.(It doesn't matter which order you connect them in. )
Step.3) Plug the power supply into the power outlet.
Step.4) Press down the button (marked SW2), and keep more than 3 seconds, the Android system will start.
WinLink
E850-96Board
.
Development Board Hardware User Guide
7/21