Zodiac E30 iQ Installation And Maintenance Manual page 36

NOTE
More than one (1) minute of inactivity will confirm selection automatically. If ON/OFF is
pressed before entering a time, all changes will be lost.
• Timer
NOTE The highest speed will have priority between timers.
1. Press to enter Settings menu.
MODE
SET
2. Press or to move through six (6) timers (P1 - P6).
MODE
SET
3. Press for selected timer to modify the selection.
MODE MODE
SET SET
MODE
SET
4. With flashing, press
previous speed is saved.
5. Press to enter speed.
MODE
SET
6. With T-Start flashing, press
7. Press to enter start time.
MODE
SET
8. With T-Stop flashing, press
9. Press to enter stop time.
MODE
SET
10. "En" (Enabled) will appear in the display by default. Press
disable and to confirm. The text will flash to indicate that it can be modified.
MODE
SET
11. Press to return to the Main Menu
• Speed SetPoints
MODE
1. Press to enter Settings menu.
SET
MODE
SET
2. Press or until "Spd1" (LOW speed) displays.
MODE
MODE
SET
SET
3. With flashing, press
MODE
SET
4. Press or to change the speed by one (1) % increments. Range is between 40 - 105% .
MODE
SET
NOTE Pressing either button down will change the speed more rapidly.
MODE
SET
5. Press to enter speed.
MODE
SET
NOTE
More than one (1) minute of inactivity will confirm selection automatically. If ON/OFF is
pressed before entering a time, all changes will be lost.
1. Press to enter Settings menu.
MODE
SET
• Priming
1. Press to enter Settings menu.
MODE
SET
2. Press or until "SPri" (LOW speed) displays.
MODE
SET
3. With digits flashing, press
MODE
SET
4. Press or to change the speed by one (1) % increments. Range is between 40 - 105% .
MODE
SET
NOTE Pressing either button down will change the speed more rapidly.
MODE
SET
36
or to change the speed selection. Initial speed will be Low unless a
MODE
SET
MODE
SET
or to enter the start time.
MODE
SET
MODE
SET
or to enter the stop time.
MODE
SET
MODE
SET
for selected speed to modify the selection.
MODE
SET
to set up Priming speed.
MODE
SET
Installation and general maintenance manual
until "Dis" appears in the display to
MODE
SET
- VARIABLE SPEED PUMP