Zodiac E30 iQ Installation And Maintenance Manual page 32

•
ELECTRICAL SHOCK HAZARD - Do not pressure test above 2.4 Bar. Pressure
testing must be done by a trained pool professional. Circulation equipment that
is not tested properly might fail, which could result in severe injury or property
damage.
•
When pressure testing the system with water, it is very important to make sure
that the pump basket lid is completely secure.
•
Fill the system with water, using care to eliminate trapped air.
•
Pressurize the system with water to no more than 2.4 Bar (241 kPa).
•
Close the valve to trap pressurized water in the system.
•
Observe the system for leaks and/or pressure decay.
FIGURE 7 - EXPLODED VIEW OF LID ASSEMBLY
32
Lid with
Locking
Ring
and
Seal
Pump
Debris
Trap
Basket
(Inside
Pump)
Installation and general maintenance manual - VARIABLE SPEED PUMP