AAXA Technologies P400+ User Manual page 48

Technical Details
Troubleshooting
THE PROJECTOR DOES NOT TURN ON
Possible Causes
There is no power.
Cannot power on the projector from the remote
control.
NO PICTURE / FILE NOT SUPPORTED
Possible Causes
The video source is not properly connected or
selected
Incorrect file extension / Video is encoded with
incorrect codec
Solution
Check to ensure the power outlet source is good.
Check the power adapter to ensure a proper con-
nection with the wall outlet as well as the projector.
To power on the projector, toggle the "On/ Off"
switch to the "ON" Position. Next, if the projector
is not powered on, press the Power button on the
remote control.
Solution
Check the video source signal to ensure that it
is properly connected. Select the current input
source by choosing the input desired from the
main menu
Please refer to "Specifications" page to see which
file types and codex are supported. Verify that the
file was encoded properly.
42