Configuring Audio Settings - Optoma Creative Touch 3 Series User Manual

BASIC OPERATIONS
•
Tap Automatic to automatically adjust the image to its optimized frequency, phase, and position.
Note: You can also adjust the image by pressing the
•
Drag the Frequency slider bar to adjust the vertical noise of the image.
•
Drag the Phase slider bar to adjust the horizontal noise of the image.
•
Drag the H. Position slider bar to adjust the image horizontal position manually.
•
Drag the V. Position slider bar to adjust the image vertical position manually.

Configuring Audio Settings

In the OSD menu, tap
•
Tap Sound Effect and select one of the available options: Standard, Meeting, Class, Movie, or User.
Note: If the sound effect setting is set to User, you can customize audio settings by adjusting the bass and
treble level according to your preference.
•
Tap Mute to mute or unmute audio.
Note: You can also mute or unmute audio by pressing the
•
Drag the Volume slider bar to adjust the volume level.
•
Drag the Bass slider bar to adjust the bass level that is suitable for your room.
Note: Bass level and treble level can be adjusted only if the Sound Effect is set to User. In other sound effect
modes this parameter is preset and cannot be adjusted.
•
Drag the Treble slider bar to adjust the treble level that is suitable for your room.
•
Drag the Balance slider bar to adjust the sound balance level that is suitable for your room.
to open the Audio menu, then complete the following steps:
key on the remote control.
key on the remote control.
41
English