Connections; Connecting To Power; Connecting External Devices - Optoma Creative Touch 3 Series User Manual

SETUP AND INSTALLATION

Connections

Connecting to Power

1. Connect one end of the power cord to the AC-in socket on the IFP.
2. Connect the other end of the power cord to a power outlet or a power supply.
3. Set the Power switch to ON (I). The IFP will automatically enter standby mode.
AC Input
100-240V

Connecting External Devices

IMPORTANT! To use touch functionality when connecting via HDMI, VGA, or DisplayPort, be sure to also connect
one end of the USB-touch cable to the USB-B TOUCH port on the IFP and the other end of the
cable to the USB-A port on your device.
HDMI input connection
•
Connect your computer to the IFP using an HDMI cable.
Touch HDMI
Power
Touch DP HDMI 2 HDMI 1
23
English