Stand Mounting (Optional) - Optoma Creative Touch 3 Series User Manual

SETUP AND INSTALLATION

Stand Mounting (Optional)

The stand mount kit includes the following items:
Stand pole (x2)
To mount the IFP on the stand, complete the following steps:
1. Install the dual mounting brackets on the rear of the IFP. Then secure the brackets with four
screws (A).
Note: Dual mounting brackets, wall mount, and screws (A) are included in the wall mount kit. Refer to
"Wall Mounting" on page 14.
18 English
Pen tray (x1)
Stand base (x1)
Wheel (x4) Screw J
Nut G (x4) Washer
Screw K (x4) Washer
A
(x16) Screw H (x4)
G1 (x4) Split Ring Lock
Washer G2 (x4)
K1 (x4) Nut K2 (x4)