Table of Contents
Advertisement
R
T
S
T
EMOVING
HE
PARE
IRE
1.
Remove the spare tire before attempting to jack up
the truck. Attach the lug wrench to the extension
tubes with the curved angle facing away from the
vehicle.
2.
Remove the protective cover over the access hole for
the winch mechanism by sliding the cover upward.
Access Hole Cover Location
3.
Insert the extension tube through the access hole
between the lower tailgate and the top of the bumper
and into the winch mechanism tube.
Winch Mechanism Tube
Inserting The Extension Tubes Into The Access Hole
4.
Rotate the lug wrench handle counterclockwise until
the spare tire is on the ground with enough cable
slack to allow you to pull it out from under the vehicle.
IN CASE OF EMERGENCY
Rotating The Lug Wrench Handle
5.
Pull the spare tire out from under the vehicle to gain
access to the spare tire retainer.
Pulling The Spare Tire Out
255
6
Advertisement
Table of Contents
