Zennio GetFace IP ZVP-FFRA2 Assembly Instructions

Flush installation - Frame - 2 modules
ZVP-FFRA2
Note: This product must be purchased together with the frame ZVP-FBOX2
ASSEMBLY OF FRAME (ONE-COLUMN LAYOUT)
1
Please remove the basic unit blind panel and place the
auxiliary parts supplied with the frame.
3
Connect the cables to the basic unit and interconnect the
additional modules with the bus.
5
Place the frame.
© Zennio Avance y Tecnología S.L.
2
Place the basic unit inside the flush-mount box and recover
the cables. Fix the enclosure with the screws (included).
4
. Fix the blind panel (or additional modules that remain in
sight) with the supplied screws and put the labels with captions
next to the buttons.
6
Fix the frame by using the supplied Allen key.
Ed. 1 For more info
GetFace IP
Assembly instructions
www.zennio.com
Page 1 / 2