Prokan BS04-BI-LP Assembly Instructions & User Manual page 16

Step 6
Install the AC (alternating current) Rotisserie Motor onto the Motor Bracket as shown below. Be sure
:
the Motor attaches to the Bracket with the electrical cord down.
Step 7 Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the left side of your grill.
:
Place the Collar into the slot opening on collar support bracket, then tighten the Collar Thumbscrew on the left end of
Collar. The Collar will stabilize the Rotisserie during the cooking process and allows the Rotisserie Spit to turn
smoothly. Plug the Rotisserie Cord into the GFCI outlet and plug the GFCI Power Cord to a properly grounded outlet,
then turn on to test.
Motor
The Collar must always be used with
this Rotisserie
BEFORE rotisserie cooking you will need to remove the
Cooking Rack/Secondary from your grill. When rotisserie cooking
place a Cooking Pan under the food to be cooked. This
will capture the drippings and keep your grill clean of excess
grease which could cause a fire. Use caution when moving
a Cooking Pan containing hot oils.
Rotisserie
Motor
Holding Forks
Thumbscrew
Thumbscrew
Collar
16 |
P a g e