Table of Contents
Advertisement
8.3 To Change or Lubricate Piston O-ring
1. Remove the fluid housing (2).
2. Remove the diaphragm (3).
3. Remove the stroke control knob (8) and spring (9).
4. Remove the retainer ring (5) and anti-rotating washer (6).
5. Remove the piston assembly (11).
6. Replace O-ring (4) if damaged; otherwise lubricate O-ring with O-ring grease.
7. Reinstall piston, retainer ring and anti-rotating washer.
8. Reinstall spring and stroke control knob.
9. Reinstall diaphragm and fluid housing.
5
6
4
7
8
9
10
11
Figure 6.0
13
3
2
11
1
12
Advertisement
Table of Contents
