CHAPTER 3. Ubigate iBG1000 Installation
T1/E1 Interface
The Ubigate iBG1000 accommodates several network connections. Use a
cable with RJ-45 connectors to connect to the T1/E1 network.
1.
Insert the RJ-45 connector on one end of the cable in any of the T1/E1
ports.
2.
Connect the RJ-45 connector on the other end of the cable to the
designated network. Make sure that the cable connectors are locked and
secure in the ports.
3-8
Figure 3.7 Connecting T1/E1 Cables
© SAMSUNG Electronics Co., Ltd.