Table of Contents
Advertisement
Connecting the Ubigate iBG1000
This section describes how to connect the Ubigate iBG1000 to various
network interfaces. Follow the procedure for the interface appropriate for your
network facility environment.
LAN Interface
The Ubigate iBG1000 accommodates several network connections. Use a
Category 5 (minimum) Ethernet cable with RJ-45 connectors to connect to the
network.
1.
Insert the RJ-45 connector on one end of the cable in any of the Ethernet
ports.
2.
Connect the RJ-45 connector on the other end of the cable to the
designated network. Make sure that the cable connectors are locked and
secure in the ports.
© SAMSUNG Electronics Co., Ltd.
Figure 3.6 Connecting LAN Cables
Ubigate iBG1000 Installation Manual/Ed.02
3-7
Advertisement
Table of Contents
