BRP BUDS2 User Manual page 5

Figure 4: Shortcut in Windows start menu
If you have never installed BUDS2 before, you need to install drivers for the VCI. If you had a BUDS2
version installed before, you do not need to install the VCI drivers again. The VCI installation is part of the
BUDS2 installation. Thus, the VCI driver can be installed by selecting 'Yes' in the next confirmation dialog:
Figure 5: VCI driver installation
Finally, BUDS2 will be installed on your computer.
Figure 6: Installation of BUDS2
After installation, an information dialog will show the outcome of the installation process. If VCI drivers were
installed, a reboot of the computer is required. Otherwise you can select to run BUDS2 immediately from
the installer. Otherwise the installer quits after selecting 'Finish'.
4