Functions Page; Settings Page - BRP BUDS2 User Manual

Functions Page

The Functions page contains the Functions and activators tab.
Functions
The Functions tab contains the information on input and output commands with routines. To activate a
command or a routine, double-click on it in the list or click on the green 'Reading' button.
Figure 41: command input/output routines
Activators
This tab allows to test (activate and stop) several electric components
Figure 42: Activators tab

Settings Page

The Settings tab contains sensor or actuator initializations, configurations, and options available for the
currently selected module. The current status of the initialization is in the second column. To perform an
initialization, double-click on it in the list or click on the green 'Play' button
21