Keys Page; Faults Page - BRP BUDS2 User Manual

Keys Page

To program keys into the vehicle or read the currently programmed keys, open the Keys Page.
Programming a new key:
1. Press on 'Read' to read the currently connected key
2. Select the key type, e.g. normal or rental
3. By clicking on 'Add', the currently connected key will be registered with the selected key type
4. The new key will be shown in the table 'Key Usage' which shows all programmed keys
To change the key type of an already programmed key, double-click on a key in the table or press the
green 'Play' button after selecting a key in the table.
Selecting 'Erase Key' will remove the currently connected key.
By clicking on 'Erase All Keys', all key settings are reset.
The keys are only programmed when the Anti-Theft System is enabled.

Faults Page

All faults are listed and described (Module, State, Code, Description) on the top right.
Figure 33: Speed profile page
Figure 34: Keys Page
16