BRP BUDS2 User Manual page 20

•
Line graph visualizes one or more numeric measurement values
•
Gauge graph visualizes one numeric measurement value
•
Switch graph visualizes one Boolean value (On/Off or Enabled/Disabled)
In the left view, the measurement values are listed. If they are selected in the table, the according value is
updated. To show a graph in the line graph, gauge graph or switch graph, select the respective graph type
in the graph column. Once the graph type is selected, the graph is displayed in the right view.
The line graph can be controlled by the following buttons in the toolbar.
start the graph drawing (visualizes and keeps samples)
pause the graph drawing (pauses sampling). After pausing the visualization and sampling can
be restarted by pressing the start button
stop the graph drawing (clears all samples)
clear the samples on the graph
move the graphic to the preferred view port
define an area with the pointer which will be the new view port
zoom in at the current position of the cursor
reset the zoom to the original settings
open the settings dialog which lets the user change the graph style like color, line width, etc.
(see below)
reset the cursor
Figure 38: Custom Measurements
19