Legal Notices; Installation - BRP BUDS2 User Manual

Legal Notices

We have made all efforts to offer current, correct and clearly-expressed information within the BUDS2 End
User Documentation.
However, we cannot guarantee that the contents are completely free of errors. Neither KPIT Technologies
GmbH (LTD) nor the authors of this document accept any legal responsibility for its contents or any
consequences, including direct or indirect liability, arising from its use.
KPIT Technologies GmbH (LTD) reserves the right to revise or change information contained in this
document at any time without notice or justification to any person or entity.

Installation

The hardware, software and internet connection of your computer are all critical to ensure an optimal
BUDS2 performance. BRP may not be able to assist you if your configuration doesn't match the following
minimum requirements:
•
Processor type:
o Intel: 3
rd
generation or later Core i5 or Core i7 processor, or
o AMD: FX or Ryzen processor
•
Processor frequency:
o 2 GHz or higher for dual-core processors, or
o 1.5 GHz or higher for processors with four cores or more
•
RAM:
o 8GB or more
•
Storage
o at least 5 GB available on the C drive:
o a solid-state disk (SSD) is recommended
•
Screen
o resolution of at least 1366 by 768
•
USB
o two USB ports available
•
Operating system
o Microsoft Windows 7 with service pack 1, 64-bit, or
o Microsoft Windows 10, 64-bit
•
Internet
o a high-speed internet connection is required
o a connection with a download speed of 30 Mbps or higher is recommended
BRP recommends using the PC for BUDS2, BossWeb and other BRP usages only. Diagnostic tools from
other powersport vendors, some computer security suites and some remote administration software have
occasionally interfered with the correct operation of BUDS2.
Computer administrator privileges are required for BUDS2 installation, as well as for module update
operations using a USB-to-USB cable connection.
To install BUDS2, execute the installation program called 'BUDS2_Setup.exe'. If you are not logged-in as
Windows administrator, please run the installation program as Windows administrator. To do this, right-click
on the installer and click on Run as administrator. If Windows opens a security warning, accept it by clicking
on 'Run'. If you want to cancel the installation process, press the 'Cancel' button or the 'X' on the top right
of the window at any point of the installation.
2