Hisense 65U8QF User Manual page 11

Installing the Stand or Wall mount bracket
4. Secure the Base Stand to the TV
with the 4 screws in accessory
tightly.
5. Restore the Base Cover at the
place shown in the figure.
Installing the wall mount bracket
Before mounting the TV, remove the TV stand if you have already attached it, and make
sure the wall mount bracket supports the weight of your TV.
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.
Place spacers between the TV and bracket.
Make sure the tilt angle between the TV screen and the
vertical surface is no more than 15 degrees.
Standard dimensions are shown below.
Wall mount hole pattern (mm)
Wall mount screw size
Rear cover of the TV
NOTE
The diameter and length of the screws differ depending on the wall mount bracket
model.
Wall mount bracket is optional. Your TV may not have wall mount bracket. Please
refer to the actual accessories.
8.0 -10.0 mm
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
3
≤15°
TV screen
400 × 300 (55")
400 × 400 (65")
M6
Screws: M5×16
Base Stand
Base Cover
Vertical
surface