Advertisement
Available languages
Available languages
1.3. Documents of equal applicability and required files
For details on the documents of equal applicability, please contact your
local trade partner or go to the download section of Ivoclar at
www.ivoclar.com.
Document
Explanation
Operating Instructions
Comprehensive information on the use of
PrograPrint Clean
PrograPrint Clean
Instructions for Use for
Information about the use of the materials to be
the different materials
processed
Safety Data Sheet on the
Safety-relevant information on the cleaning agent
cleaning agent
isopropanol
isopropanol (isopropyl
alcohol)
Operating Instructions on
Information about requirements that must be observed
the use of the 3D printer
for the transport, set-up and use of PrograPrint PR5
PrograPrint PR5
Operating Instructions for
Information about requirements that must be observed
the post-curing unit
for the transport, set-up and use of PrograPrint Cure
PrograPrint Cure
Instructions for Use for
Handbook for the PrograPrint CAM software
PrograPrint CAM
Short Instructions for:
Excerpt of operation-relevant topics from the respective
Operating Instructions
– PrograPrint PR5
– PrograPrint Clean
(this document)
– PrograPrint Cure
6
2. Safety
WARNING! Improper use of the device.
Hazard to the user.
f The safety chapter contains important information on the safety of the
device: Please read it thoroughly prior to installation and operation.
The device is built according to state-of-the-art technology and recognized
safety regulations. Nevertheless, operation bears the risk of injury to the
user or third parties. Moreover, impairments of the device and other
property are possible.
2.1.
Intended use
PrograPrint Clean has been designed for cleaning the dental objects produced by the
PrograPrint PR5.
Use the PrograMill Clean exclusively for this purpose.
In the case of damage caused by improper use or failure to observe the Operating
Instructions, all liability and guarantee claims are void.
PrograPrint Clean is for cleaning with isopropanol that has the following properties:
– It must have a purity of at least 99.8%
– It must be suitable for cleaning medical products
Please note that only the materials and cleaning agents approved by the manufacturer
ensure processing without damage to the machine.
All information regarding material and indication extensions corresponds to
the state of knowledge at the time of going to print.
For additional details, go to http://www.ivoclar.com.
The Ivoclar Download Center is available at
https://downloadcenter.ivoclar.com/#lang=en
The cleaning of non-approved 3D printed materials from other
manufacturers is not recommended due to the lack of coordination with
the printing/fabrication process.
Advertisement
