Redbusbar SS10LNAN Manual

Part Number: SS10LNAN
Description: 10 Year Lithium Battery Power Photoelectric Smoke Alarm with Option Card
PLEASE LEAVE THESE INSTRUCTIONS WITH THE OCCUPANT, TO BE RETAINED FOR THE LIFE OF THE ALARM.
1 Read all Instructions before Installation and Operation
Regular testing of this smoke alarm is necessary to ensure the unit is functional and that the battery is in good
condition. It is recommended that the smoke alarm be replaced after 10 years of normal service. The only user-
serviceable parts are the Option Card batteries. Refer to 'Replacing the Backup Batteries'.
EQUIPMENT INSTALLATION HAZARD
• This product must only be used for the purpose described in these instructions and must be installed in accordance
with the local regulations.
• Ensure that the product has been correctly installed and tested for safe operation.
• Smoke Test each interlinked alarm. Check to ensure every interlinked alarm, alarms correctly. If any unit fails to
alarm, refer to 'Troubleshooting'
Failure to follow these instructions may result in equipment damage or injury.
Smoke Alarm – Top View
1
Mounting Base – Top View
6
SmokeSight SS10LNAN V0.9.0
SmokeSight Residential Smoke Alarm
1. Option Card
2. Alarm (Red)
2
3. Smoke Alarm
4. Option Card
5. Option Card
6. Locking Tab
7
7. Tamper Clip
7
By Redbusbar
(White) LED
LED
Power Switch
Battery Holder
Enable
Switches
Smoke Alarm – Bottom View
5
4
Mounting Base – Bottom View
7
7
3
6
Page 1