Fujitsu TeamPoS 7000 Series User Manual page 18

3. Connect AC power cable to power supply unit.
Power supply unit
4. To re-install the base top cover, set the far end of the cover to the original position.
Close the base top cover and push it slightly, and the tabs are locked.
• Do not damage or modify the power cord.
Since doing so may present a risk of electric shock, burns or other
injury.
• Do not handle the power cord with wet hands.
Failure to do so may present a risk of electric shock.
• Always unplug the power cord from the wall socket before relocating the
equipment. Remove any cables that are connected. Take great care
whenever you move the unit
Failure to do so may cause damage to the power cable, presenting a risk of
fire or electric shock, or may cause that unit to fall, resulting in injury.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
AC power cable
Page 4