Factory Default Reset - Sercel GRC Data Pro Operation Manual

8.7.7 Factory Default Reset

To execute this feature, following these steps: Menu  System  Factory Default Reset OK
Clicking on 'Factory Default Reset' initiates the closing of the Data Pro application and then
opens it back up with the EULA form
opening of the Data Pro application.
This feature enables the user to restore the factory default settings
this feature overwrites the existing configuration file, which means loss of configuration setting on
relays, analog inputs, analog outputs, and communication ports. Any logged data is preserved during a
factory reset. To remove the log data, the user must proceed to the logging data menu and delete the
data.
Parameter
Menu Password
Menu Timeout in seconds
Auto Toggle Tabs
Pressure Units
Temperature Units
Pressure and Temperature decimal places
Sample Rate in seconds
Relay#1 and Relay#2
Analog Out #1 and #2
Data Pro
Operation Manual
50). The user checks on "I Agree" to proceed with the
(Figure
Figure 50– End User License Agreement Window
(Table 9). The execution of
Setting
1234
300
Enabled
Psia
F
1
60
Off
Disabled
P/N 10029355 Rev
Page 54 of 97
AH