Advertisement
1. Installation Guide
1.1 Inserting a Memory Card (Recommended: Vantrue
U3 high-speed microSD card).
After inserting the SD card for the first time, please
press and hold the remote control record button
for 10 seconds to start formatting the card.
Use the matching screwdriver to
remove the slot sealing cover
Insert an Memory Card
Note:
After removing the cover of the SD card slot, put
the screw in place to avoid losing it.
1.2 Installing the Dash Cam Main Unit
Please install the main unit a location without
metal cover, such as under the seat, determine
the location and tear off the 3M adhesive to fix it.
Note:
<1>The Wi-Fi signal transmitting part is on the front
- 1 -
Advertisement
