Information Screen; Service Screen - Kenwood DDX512 Service Manual

Key Specifi cation
Information : Transfer to Information screen.
Service : Transfer to Service screen.
Direct Select : Transfer to Direct Select screen.
Touch : Transfer to Touch Adjust screen.
HPOSI : Transfer to HPOSI Adjustment screen.
iPod : Transfer to iPod Authentication Chip Confi r-
mation screen.
Auto Adjust : Transfer to Auto Adjust Menu screen.
Inverter : Transfer to Inverter Confi rmation screen.
NAVI : Transfer to Navigation MAP Update Confi r-
mation screen.
Bluetooth : Transfer to Bluetooth Confirmation screen
(only in the system running on the produc-
tion line).

3.2 Information screen

This screen is to display such information as version num-
ber and other conditions.
The contents displayed on the Information screen are
shown in Figure 3.2.
Information
DNX (DDX or KVT) Type : ∗
Serial : ∗∗∗∗∗∗∗∗ DC Offset : None
Media Processor (Application) : Sep 15 2006 12:00:00
Decoder Firmware : V1.00
macrovision : V1.00
Mstar : V1.00
System uCom : V∗.∗∗∗
BT Module : V∗.∗∗∗ PIN CODE : 1234
Figure 3.2 Information screen
Key Specifi cation
Return : Transfer to Test Mode Main screen

3.3 Service screen

This screen is to show a variety of service information.
Pressing each [Clear] key is to clear the data saved in
E2PROM.
The contents displayed on the Service screen are shown in
Figure 3.3.
TEST MODE
Region : ∗
Security : Off
RPM : R – ––– SPAN : *
Return
DDX5022/5022Y/5032/5032M/512/52RY
DNX5120/512EX/5220/5220BT
Service
Serial DVS-8000 Service
DVD/USB DivX
∗ ∗ ∗ ∗
Registration Code Clear
Power on ∗∗∗ minutes
■Init
Monitor Open ∗∗∗ times
■Init
Figure 3.3 Service screen
Key Specifi cation
Serial : Transfer to the screen to manually in-
put the Serial No.
DVS-8000 Service : Transfer to DVS-8000 Service Informa-
tion Display screen.
Tuner Mute Level : Transfer to Tuner Mute Level Adjust-
ment screen
DVD/USB DivX Registration Clear : Clear DVD DivX Regis-
DC Offset Clear : Clear DC Offset information in E2PROM.
: Initialize Power On time and number
■Init
of Monitor Open.
Return : Transfer to Test Mode Main screen
• DVD/USB DivX Registration Code
Display DivX Registration Code, and clear the Code with
[Clear] key.
After the clearing of the Code, display "None".
∗ Clear the Code after ejecting the DISC.
• DC Offset
When the DC Offset detection information is shown as
"None", it means that the offset is not detected. When it is
shown as "Detect (x)", it means that the offset is detected.
X=0~3 : The number of capacitor leak detected.
Clear the detection information using the [Clear] key.
• Service Information
Display Power On time and the number of Monitor Open.
Pressing the [Init] key for 1 or more second initializes the
service information being displayed.
Tuner Mute Level
DC Offset
None
Clear
Return
tration Code.
17