Video Control - Kenwood DDX512 Service Manual

ventional functions.)
The mode of the remote controller shall be "AUDIO".
Table 4.3 Remote Controller key
Key
Band (FM+) DVD video inspection switching
M/S (AM-) DVD audio inspection switching
Tenkey0 Flicker Adjustment
Illumination switching (Switch from Red to Green or
Tenkey1 vice versa (Red↔Green) only at KVT)
∗ Other than [variable] key
Tenkey2 Check DC Offset
Tenkey3 Change the V-IN (R-CAM) mirror mode switching
Tenkey5 NAVI forced interruption (Audio)
Tenkey6 Call Screen Adjustment screen
Tenkey7 Direct call of variable illumination green
Tenkey8 Direct call of variable illumination blue
Tenkey9 Direct call of variable illumination red

4.4 Video Control

• In conjunction with change of the audio source, change
AV-OUT (In the case of Graphic and NAVI, use AV-IN in
stead of AV-OUT).
AVIN → AV-OUT: AVIN
iPod → AV-OUT: iPod
DVD → AV-OUT: DVD
USB → AV-OUT: USB
TV → AV-OUT: TV
4.5 Tuner
• When unable to access E2PROM, display Error (on the
Tuner screen).
• K3I forced switching
Forced to Narrow by pressing and hold Preset 4: xxx.
x1MHz
Forced to Middle by pressing and holding Preset 5: xxx.
x2MHz
Forced to Wide by pressing and holding Preset 6: xxx.
x3MHz
• KVT: [SRC] key+[VOL.DW] key+[Reset] key
DDX/DNX: [NAV] key+[EJECT] key+[Reset] key
Use the above keys to change between Span (K↔M).
Span information is displayed on the Information screen.
• When RDS PS is "RDS_TEST" in the Tuner source, turn
OFF P-CON.
4.6 TV Tuner
• In the case of destination E, the default value of TV1 shall
TEST MODE
Function
DDX5022/5022Y/5032/5032M/512/52RY
DNX5120/512EX/5220/5220BT
be "Area 5 (Russia), 8ch (191.25MHz)" (when KTC-V500 is
connected).
• In the case of destination E, the default value of TV1 shall
be "Area 4 (Russia), 8ch (191.25MHz)" (when KTC-V300 is
connected).
• ∗ If started up as above, even if the Test mode is cleared
by ACC, Power OFF → ON, the setting values are main-
tained. (The default value is resumed by the Reset.)
4.7 DVD
• Use CD media KTD-02A, DVD media TDV-540A/TTD-100
to play back in the order of the following sequence.
• Use "Title1-Chapter1" while Loading.
• Check CDDA (KTD-02A)
• Use "Track UP/DW" to play back in the order of sequence
as shown below:
1 ↔ 9 ↔ 15 ↔ 10 ↔ 11 ↔ 12 ↔ 13 ↔ 14 ↔ 9 ↔ 1...
Track 28 is directly selected by pressing [RDM] key.
• DVD audio/video checking (TDV-540A)
Use "Chapter UP/DW" to play back in the order of se-
quence as shown in Tables 4.7 and 4.8.
Use FM/AM on the remote controller to change the video/
audio check.
Table 4.7 DVD Video check
For DVD video checking.
Title Chapter
3 6 Level
3 17 AM/PM noise
Frequency
3 8
characteristics
3 12 Color measurement
4 1 1kHz 0dB
4 6 17Hz
Table 4.8 DVD Audio check
For DVD audio checking.
Title Chapter
4 1 1kHz 0dB
4 6 17Hz
4 16 44kHz
4 2 Infi nity
4 3 L
4 4 R
4 1 1kHz 0dB
4 2 Infi nity
Audiostream1
Audiostream1
Audiostream1
Audiostream1
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
PCM96k/24bit Audiostream3
Dolby Audiostream1
Dolby Audiostream1
21