Assembly Steps - modway EEI-4409 Manual

EEI-4409 ARMCHAIR
STEP 1:
1. Please put Armchair Body (1) on a carpeted or padded surface.
2. Attach 1 piece of Front Leg (2) to the front of Armchair Body (1) by using 6 pieces of Bolts (A). Tighten
Bolts (A) by using Allen Wrench (C) clockwise fully as shown in Figure 1.
3. Insert 2 pieces of Screws (B) into the holes in Front Leg (2), tighten Screws (B) by using
Screw Driver (D) clockwise fully as shown in Figure 2.
4. Repeat the same steps for the Back Leg (3) as shown.
STEP 3:
Carefully turn over the assembled Armchair Body (1), Front Leg (2) and Back Leg (3) by two adults.
Customer Service 609-256-9000︱www.modway.com
Assembly is complete. Your armchair is ready to enjoy now!
Page 2 of 2